My Cart
Checkout Secure
How to Assemble, Operate, and Disassemble the Spitfire Scout Portable Scooter

How to Assemble, Operate, and Disassemble the Spitfire Scout Portable Scooter

If you are a budget-conscious customer looking for an easy to operate and portable vehicle for your daily life use, this is the best you can get. The Spitfire Scout comes with all these amazing features: one-hand operation, adjustable arm sets, medium-size basket for shopping, anti-tip wheels, flat-free tires, and a frame of low maintenance - with all of this, it has got to be the most suitable scooter for you. It is a lightweight, travel-friendly, conveniently-designed, full-sized scooter that will meet all your indoor and outdoor travel needs.

How to Assemble the Spitfire Scout Portable Scooter?

Step 1:  Begin by aligning the front and rear sections together. Lift the connecting handle while slowly moving the sections towards each other. (see figure 1)

Figure 1

Step 2:  As the front and rear sections join together, a hook will be locked in-between and they will get locked together. Make sure you hear the click of the hook lock.

Step 3: The tiller height can be adjusted by loosening the tiller angle adjustment knob, and raising the tiller manually to the required height. Once the height is set, tighten the knob to secure it in place. 

Step 4: Put the batteries into the battery compartment. There is a battery lock on the top of the compartment, rotate it over the battery pack to lock the batteries in place. (see figure 2)

Figure 2

Step 5: For placing seat assembly, lift the seat release lever and place the seat on the seat post. Release the lever now and rotate the seat down until it locks itself in the right place. (see figure 3)

Figure 3

Step 6: Adjust the armrests by sliding them through the attachment points in the seat frame until the armrests are facing forward. Adjust the desired width then lock the armrests by tightening the star knobs.

Step 7: Align the bracket on the tiller with the mounting holes on the basket to attach the storage basket. Push the basket down to secure it in its place.

Step 8: The batteries can be charged by inserting the round charger connector into the battery charge terminals and the 3-pronged plug into the main electricity outlet.

How to Operate the Spitfire Scout Portable Scooter?

With a healthy 300 lb. weight capacity, a charge range of 15 miles with upgraded batteries and a top speed of 4.25 mph, this is just the right product for your on-the-go lifestyle. The armrests are adjustable, and the seatback also folds down to create enough storage space. The assembly and disassembly processes are simple, with the heaviest piece weighing only 29lbs you can imagine how simple  this unit is designed. But before making your first trip, you need to keep in mind some safety tips. As follows:

  • Inspect the battery pack and connection. Make sure they are secured properly and not corroded.
  • Don’t exceed the maximum weight capacity. Remember this is a single-user scooter.
  • Never put your scooter on freewheel mode when standing on an inclined plane. It can cause an accident.
  • Never try to pass the scooter over a notable obstacle greater than the maximum allowable ground clearance.
  • Do not ever try to operate your portable scooter on stairs or escalators. This could be very harmful.

How to Disassemble the Spitfire Scout Portable Scooter?

As the name indicates, the Spitfire Scout is portable in its design. It can easily disassemble into five pieces: a basket, seat assembly, battery pack, and the front and rear sections. The process of disassembling is gradual and simple. All you need to do is follow some easy steps until your scooter is ready to be packed into your family car. Those steps are:

 

Step 1:  Begin with removing the seat assembly by pulling upward the swivel release lever. The seat would easily be removed by lifting. Remove the seat and put it aside. (see figure 4)

Figure 4

 

Step 2: To remove the batteries, the battery lock needs to be unlocked. You can easily unlock it by rotating it 180° anti-clockwise until it allows the batteries to be removed. (see figure 2)

 

Step 3: To secure the tiller in its required place, tighten the angle adjustment knob. But before doing it, loosen the tiller angle adjustment knob and reduce the tiller to its lowest position. (see figure 5)

Figure 5

 

Step 4: At last separate the front and rear sections by pulling up the connecting handle between them. Your scooter is ready to be packed and ported. (see figure 1)


Older Post Newer Post


Added to cart!