Mobility Scooters & Electric Wheelchairs at Scooters 'N Chairs

My Cart
Checkout Secure

Pride Mobility: Keypad for 6 Key VR2 Joystick Controller

Your Price:
$51.99
OUR LOW PRICE INCLUDES:
  • FREE Batteries
  • "Best on the Web" Return Policy
  • Free Shipping for Orders over $50
  • 5 Year Limited Warranty
  • White Glove Available
  • In-Home Service
Total Price:
$51.99
  • Overview
  • Shipping

Quick Overview

  • Keypad for 6 key VR2 joystick controllers with seat lift function
  • VR2 joystick template includes the following keys:
  • Dual actuator keys
  • Dual actuator lights
  • Horn key
  • On/off key
  • Speed/profile decrease key
  • Speed/profile increase key

Description

Installation Instructions:
1. Ensure the wheelchair power is turned off.
2. Pull the gray collar back and disconnect the joystick cable from the joystick.
3. Peel up and remove the existing, damaged keypad from the joystick face plate.
4. Inspect the joystick contacts, face plate, and joystick housing for corrosion and/or damage.
5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
6. Ensure no adhesive remains around the rim of the joystick face plate.
7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
10. Remove the backing from the new keypad.
11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
15. Connect the joystick cable to the joystick.
16. Turn on wheelchair power and test the joystick functions.
17. If the joystick does not function properly, you may have a faulty joystick.

Compatibility

  • Avid Rehab Vector P323
  • Merits Multi Rehab ( P201+)
  • Merits Vector (P323)
  • Merits Vector (P324)
  • Zip'r Mobility Mantis

Added to cart!