Mobility Scooters & Electric Wheelchairs at Scooters 'N Chairs

My Cart
Checkout Secure

Pride Mobility: Keypad for 6 Key VSI Joystick Controller

Your Price:
$48.99
OUR LOW PRICE INCLUDES:
  • FREE Batteries
  • "Best on the Web" Return Policy
  • Free Shipping for Orders over $50
  • 5 Year Limited Warranty
  • White Glove Available
  • In-Home Service
Total Price:
$48.99
  • Overview
  • Shipping

Quick Overview

  • Joystick keypad template to be used with 6 key VSI joystick controllers made by PG Drives Technology on Pride Mobility scooter models
  • VSI Joystick template includes the following keys:
  • Battery condition meter
  • On/off key
  • Speed/profile increase key
  • Horn key
  • Speed/profile decrease key
  • Maximum speed/profile indicator
  • For features used on some models, two actuator lights and two actuator keys are also included on this template
  • 30 Day Warranty

Description

Joystick keypad template to be used with 6 key VSI joystick controllers made by PG Drives Technology on Pride Mobility scooter models.

VSI Joystick template includes the following keys:
  • Battery condition meter
  • On/off key
  • Speed/profile increase key
  • Horn key
  • Speed/profile decrease key
  • Maximum speed/profile indicator

  • For features used on some models two actuator lights and two actuator keys are also included on this template.

    Installation Instructions:
    1. Ensure the wheelchair power is turned off.
    2. Pull the gray collar back and disconnect the joystick cable from the joystick.
    3. Peel up and remove the existing, damaged keypad from the joystick face plate.
    4. Inspect the joystick contacts, face plate, amnd joystick housing for corrosion and/or damage.
    5. Using an alcohol prep pad, remove any adhesive from the joystick face plate.
    6. Ensure no adhesive remains around the rim of the joystick face plate.
    7. Gently remove any adhesive that may have collected in the lighting or contact cutouts of the joystick face plate.
    8. After cleaning, set the joystick aside for ten minutes to allow all alcohol to evaporate from the joystick face plate.
    9. Inspect once more for adhesive lumps or residue. If necessary, repeat steps 5-8 to clean the joystick face again if adhesive is present.
    10. Remove the backing from the new keypad.
    11. Align the bottom edge of the keypad with the bottom edge of the joystick face plate. Ensure the keypad is properly aligned with the joystick face plate before installing. The overlay is not repositionable.
    12. Working from the bottom up, gently press the keypad completely into the joystick face plate.
    13. Firmly press the keypad into the joystick face plate ensuring proper seal between the adhesive and joystick face plate.
    14. Ensure the keypad is completely seated into the joystick face plate and no air pockets or ripples are present around the edge of the keypad.
    15. Connect the joystick cable to the joystick.
    16. Turn on wheelchair power and test the joystick functions.
    17. If the joystick does not function properly, you may have a faulty joystick.

    Compatibility

    • Amigo Mobility eXcite (590000)
    • Permobil C300 Corpus
    • Permobil C300 Corpus 3G

    Added to cart!