ShowerBuddy Tubbuddy Tilt

ShowerBuddy
SKU:
SB2T
$3,480.75
Current Stock:
Adding to cart… The item has been added

The TubBuddy with Tilt SB2T transfer system will turn your existing bathtub into an accessible bathroom that allows you to enjoy showering again without the excessive cost, delay, and stress of a full bathroom remodel.

The TubBuddy with Tilt SB2T alleviates heavy lifting and multiple transfers for toiling and showering. This chair is separated into three sections; rolling base (shower chair), bridge, and tub base. The rolling base rolls around the house like a wheelchair allowing the patient to easily transfer and then roll right over most toilets. Once completed with toiling the rolling base connects to a bridge and then onto the tub base allowing the chair to slide in a tilt position over the tub. Once over the tub, the bridge disconnects allowing the curtain to close.

  • The TubBuddy with Tilt SB2T allows the chair to tilt while transferring over the tub preventing the caregiver from lifting the patient's legs over the tub.
  • The system is made of aluminum which will not rust when in contact with water.
  • Height adjustability on rolling base and tub base- allowing for use in a variety of tubs.
  • Rolls over some toilets- allowing for a “no mess” alternative to commode usage.
  • Custom bridge sizes are available- allowing for use in a variety of bathroom sizes.
Specifications
Shipping Cost Calculated at Checkout
PRODUCT SPECS WEIGHTS & DIMENSIONS
Weight Limit 350 lbs (160kg)
Total Length When Tilted 59"
Rolling Base (w x D) 19.3” x 33”
Rolling Base w/ Footrests (W x D) 19.3” x 43.3”
Outer Armrest Width 22.5”
Inner Armrest Width 18.7”
Width Inside Main Legs 15.7”
Backrest Width 18"
Back Rest Height from Cushion 17”
Toilet Height Clearance (maximum) 19.4”
Standard Bridge Length (Can Be Customized) 11.8”
Seat Cushion WxD 17.7” x 16.5”
Seat Cushion Height from Floor 24.8” – 28.8”
Seat Cushion Opening W x D 6.8” x 13”
Tub Base (at top) W x D 19" x 13”
Tub Base (at bottom of legs) W x D 13.2” x 29"
Tub Base (side stabilizers) 16.7” – 28.3”
PRODUCT FEATURES 0 – 30°, Infinite Positioning
Tilt Angle Removable / Lockable / Flip-back
Armrests Height Adjustable
Height Corrosion-resistant Aluminum frame (Grade 6061 T6)
Frame Material Stainless steel parts and hardware (Grade 304)
Misc. Parts Lap & Chest Belts
Safety Belts 5” Lockable
Caster Wheels Removable Commode system
Weight 81 lbs
Height 34"
Width 22"
Depth 32"

User Manual

Warranty

2 Year Limited Warranty: Showerbuddy warrants our Showerbuddy Solutions and all Showerbuddy products for two years from the date of purchase by the consumer. The warranty will only become active once the consumer submits the warranty registration card to the company with a copy of the purchase receipt. This warranty covers defects in materials and workmanship on all Showerbuddy products.

WARRANTY EXCLUSIONS

-Product or parts failure from normal wear and tear
-Damage caused by failure to adhere to the User’s Manual
-Damage from improper installation, use or repair
-Brake line that operates the handbrake/tilt mechanism on tilting chairs (SB2T and SB3T)
-Improper use of the hand ratchet that is used in adjusting the neck support/adjustment
-Seat cushions and armrests

LIMITATIONS

-The warranty is VOID if the original serial number tag is removed or altered.
-The warranty is VOID if the unit sustains damage from unnatural causes.
-The warranty is VOID if the unit is used to hold more than the weight limit of 300 pounds (140kg).
-The warranty is VOID if the unit has been subjected to neglect, improper maintenance, storage, cleaning, or operation as defined in the User’s Manual.
-The warranty is VOID if the unit is modified without Showerbuddy’s written consent.
-This warranty applies to the original purchaser only, from the date of the purchase, provided a registration card has been submitted to the company within 60 days of purchase.